Manganese Sulfate USP Manganese Sulphate BP ACS FCC

Anmol Chemicals is the pioneer manufacturers of Manganese Sulphate, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Manganese Sulphate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Manganese Sulfate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Manganese Sulphate BP Manganese Sulfate USP Manganese Sulfate Manufacturers

CHARACTERS
Appearance: Pale pink crystalline powder, slightly hygroscopic.
Solubility
Freely soluble in water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. Solution S (see Tests) gives reaction of sulphates.
B. Dissolve 50 mg in 5 ml of water. Add 0.5 ml of ammonium sulphide solution. A pale pink precipitate is formed which dissolves on the addition of 1 ml of anhydrous acetic acid.
C. Loss on ignition (see Tests).

TESTS
Solution S: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension.
Chlorides: Maximum 100 ppm.
Iron: Maximum 10 ppm, determined on solution S.
Zinc: Maximum 50 ppm.
Heavy metals: Maximum 20 ppm.
Loss on ignition: 10.0 per cent to 12.0 per cent, determined on 1.00 g at 500 ± 50C.

DEFINITION
Manganese Sulphate is manganese (II) sulphate tetrahydrate. It contains not less than 98.0% and not more than 100.5% of MnSO4, calculated with reference to the substance ignited at 450 to 500C.

CHARACTERISTICS
Pale pink crystals or crystalline powder.
Freely soluble in water; practically insoluble in ethanol (96%).

IDENTIFICATION
A. Dissolve 0.5 g in 10 ml of water and add 1 ml of sodium sulphide solution. A pink precipitate is produced which is soluble in 6M acetic acid.
B. To 0.1 g add 2 g of lead-(IV) oxide and 5 ml of nitric acid , boil gently for a few minutes, add 100 ml of water and filter. A purple solution is produced.
C. Yields the reactions characteristic of sulphates.

TESTS
Arsenic: 4 ppm
Heavy metals: 40 ppm
Iron: 40 ppm
Zinc: 500 ppm
Chloride: 330 ppm
Loss on ignition: When ignited to constant weight at 450° to 500°, loses 31.0 to 34.0% of its weight. Use 1 g.

Manganese Sulfate USP
MnSO4·H2O 169.02
Sulfuric acid, manganese(2+) salt (1:1) monohydrate.
Manganese(2+) sulfate (1:1) monohydrate [CAS Number 10034-96-5]
Anhydrous 151.00 [CAS Number 7785-87-7]

Manganese Sulfate contains not less than 98.0 percent and not more than 102.0 percent of MnSO4·H2O.

Identification: A solution (1 in 10) responds to the tests for Manganese 191 and for Sulfate.
Loss on ignition: Ignite it at 450 to constant weight: it loses between 10.0% and 13.0% of its weight.
Substances not precipitated by ammonium sulfide: Dissolve 2.0 g in 90 mL of water, add 5 mL of ammonium hydroxide, warm the solution, and pass hydrogen sulfide through the solution for about 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a filter, transfer 50 mL of the clear filtrate to a tarred dish, evaporate to dryness, and ignite, gently at first and finally at 800 ± 25 : the weight of the residue does not exceed 5 mg (0.5%).

Manganese Sulfate FCC Food Grade
MnSO4-H2O Formula wt 169.02
CAS Number 7785-87-7

DESCRIPTION
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.
Function: Nutrient.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Manganese and for Sulfate.
Assay: Not less than 98.0% and not more than 102.0% of MnSO4·H2O.
Arsenic: Not more than 3 mg/kg.
Lead: Not more than 4 mg/kg.
Loss on Heating: Between 10.0% and 13.0%.
Selenium: Not more than 0.003%.

Manganese Sulfate Monohydrate ACS Analytical Reagent
Manganese Sulfate Monohydrate ACS
Manganese (II) Sulfate Monohydrate
Manganous Sulfate Monohydrate
MnSO4-H2O
Formula Wt 169.02
CAS Number 10034-96-5

REQUIREMENTS
Assay: 98.0-101.0% MnSO4-H2O
Loss on ignition: 10.0-12.0%
Substances reducing permanganate: Passes test

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.005%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Nickel (Ni): 0.02%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%
Heavy metals (as Pb): 0.002%
Iron (Fe): 0.002%

Manganese Sulfate USP, Manganese Sulphate BP ACS FCC manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Georgia, Korea, Japan, etc.